Home / Solon

Asphalt paving and sealcoating in Solon, Iowa

Asphalt paving and sealcoating job near Solon, Iowa

Cedar Rapids Paving Co handles asphalt paving and sealcoating for homeowners and businesses in Solon, Iowa. About 3,182 people live in Solon, according to the U.S. Census Bureau's 2023 estimate.

Tell us what you need and a local pro will give you a free, no-pressure quote.

Get my free Solon quote

About Solon

Solon is a city in Johnson County, Iowa, about 14 miles southeast of Cedar Rapids.

Like the rest of the Cedar Rapids area, Solon has a humid continental climate: cold, snowy winters and warm summers, so freeze-thaw cycles and spring storms are part of planning asphalt paving and sealcoating here.

Solon at a glance

Sources: U.S. Census Bureau (Gazetteer and geocoder); Wikidata; Wikipedia: Solon; Wikipedia: Cedar Rapids climate.

Asphalt paving and sealcoating Services in Solon

Driveway Paving in Solon

New asphalt driveways installed with proper grading and a solid aggregate base to handle freeze-thaw cycles. Local pros prep the subgrade, compact the base, and lay hot asphalt that cures smooth and drains water away from your foundation.

Parking Lot Paving in Solon

Commercial parking lot installation and overlays for businesses, apartment complexes, and churches. Local pros work around your schedule and can phase the job so you stay open during construction.

Asphalt Repair and Patching in Solon

Fixing potholes, edge crumbling, and sunken sections before they get worse. Local pros cut out the damaged area, replace the base if needed, and patch it with hot asphalt that bonds to the existing surface.

Sealcoating in Solon

Sealcoating every two to three years protects asphalt from water, sun, and chemicals. It fills surface voids and adds a protective layer that slows oxidation and keeps your driveway or lot looking sharp.

Crack Sealing in Solon

Local pros clean and fill cracks before water gets in and starts the freeze-thaw damage. Crack sealing is one of the best ways to add years to your pavement without spending a fortune.

Asphalt Milling and Overlays in Solon

When your surface is worn but the base is still solid, local pros mill off the top layer and pave a fresh overlay. This costs less than full removal and gives you a smooth new surface.

How It Works

  1. Free Site Visit and Estimate. Local pros come out to look at your driveway or parking lot, check the current condition, measure the area, and talk through what you need. You get a written estimate that breaks down materials and labor.
  2. Site Prep and Excavation. Local pros remove old asphalt or dig down to the proper depth for new construction. Grading is done to direct water away from buildings and toward drainage areas.
  3. Base Installation and Compaction. Local pros haul in crushed aggregate, spread it evenly, and compact it with a roller or plate compactor. A solid base is the foundation for long-lasting asphalt.
  4. Asphalt Paving. Hot asphalt is delivered, spread with a paver or by hand for smaller areas, and compacted smooth. Local pros pay attention to transitions, edges, and slopes so everything drains properly.
  5. Finishing and Cleanup. Local pros clean up the site, haul away debris, and let you know when it is safe to drive on the new pavement. Asphalt needs a day or two to cure before heavy use.

What Does Asphalt Paving Cost in Cedar Rapids

A typical residential driveway in Cedar Rapids runs between $3 and $5 per square foot for new asphalt, so a standard two-car driveway around 600 square feet costs roughly $1,800 to $3,000. If you need full excavation and new base because the old one failed, add another $1 to $2 per square foot. Sealcoating costs around $0.15 to $0.25 per square foot, so that same 600 square foot driveway runs $90 to $150 for a fresh coat every few years. Parking lots are priced similarly but the per-square-foot cost drops as the project gets larger. Prices go up if the pro has to remove old concrete, dig out tree roots, bring in extra base material for soft spots, or work around tight access. Asphalt prices also fluctuate with oil costs, so prices can shift between spring and fall.

Asphalt paving and sealcoating Questions in Solon

Do I need a permit for asphalt paving and sealcoating in Solon?

It depends on the job. For work inside Solon city limits, check with the city first (https://www.solon-iowa.com/). Outside city limits, Johnson County rules apply (https://www.johnsoncountyiowa.gov/). A local pro can tell you whether your project needs a permit before work starts.

How far is Solon from Cedar Rapids?

About 14 miles southeast of Cedar Rapids, measured straight line between the two city centers. Actual drive time depends on the route.

How do I get a quote for asphalt paving and sealcoating in Solon?

Use the free quote form and put Solon as your town. Cedar Rapids Paving Co is an independent referral service, so your request goes to local paving contractors who take jobs in Solon and the rest of Johnson County.

Other Towns We Serve

See the products we recommend in our Paving Shop. As an Amazon Associate we earn from qualifying purchases made through that page.

Share this pageTextFacebook
Call